Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Operating Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, tanks, legs, and other compressed air system components Cleans the compressed air system after installation Note the direction when installing the valve: do not use a hose at the outlet that cannot withstand air impact Power supply voltage must match the drain valve voltage: when using DC, the positive pole must be connected to terminal "1" When wiring the drain valve, connect as follows: brown wire to L (live), blue wire to N (neutral), yellow-green wire to GND (ground) Tighten the screws on the terminal box securely to prevent water ingress Warning: Before installing the electronic drain valve, ensure that: - The compressed air system is fully depressurized (zero pressure) - The power supply is turned off Color: Gold + Black Material: Metal Flow: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Other items not included Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement tolerance: ±1–3 cm