1、Widely used for monitoring food, drugs, chemical products and otheransport and storage process. 2、After the record ends, you can directly insert the computer to get PDF report. 3、Built in USB connector, directly connect PC or cellphone, no cable or reader required. 4、With high precision ±0.5°C and high sensitivity. 5、It has small and compact size, easy to carry. 6、Wide range of temperature measurement, it can store 10,000 data.Condition: Brand NewItem Type: Temperature RecorderMaterial: PlasticColor: As shown in the pictureSize: Approx.67x28mm/2.64x1.1inL x WWeight: Approx.13g/0.5ozType: Single use Log Interval: 10 minutesAccuracy: ±0.5℃-20℃~+40℃Out of Range: ±1℃Data Capacity: 10000Alarm Temperature Range: < 2℃ or > 8℃< 35.6℉ or > 46.4℉Start Delay: 30minutesWorking Environment Temperature: -30℃~+60℃Battery: 210mAh CR2032 BatteryIncludedInsuctions:1. Press and hold the “Start/Stop” button for more than 3s, the “OK” indicator will be on for 3S, indicating that the device starts recording, and then you can place the device in the environment you need to monitor.2. During the recording process, the device will automatically light every 10s. If the normal indicator light ie green light is lit every 10s, it means that the device is not over temperature during the recording process. If the alarm indicator light ie red light is illuminated every 10 seconds, Explain that over-temperature has occurred during the recording process. Note: As long as over-temperature is found during the recording process, the green light will no longer illuminate.3. Press and hold the “Start/Stop” button for more than 3s, the alarm indicator ie red light will be on for 3s, indicating that the device stops recording. The recording will also stop automatically when the device is full. After the device stops recording, it will not automatically flash. If the device is over-temperature during recording, press the “Start/Stop” button. If the normal indicator green light is on, it indicates that the temperature is not over-recorded during the recording; if the alarm is When the indicator light ie red light is on, it indicates that the temperature is over temperature during recording.4. Remove the waterproof packaging bag and insert the device into the computer USB interface. During the PDF file generation process, the normal indicator light ie green light and the alarm indicator light ie red light will turn on. When the file is generated, the normal indicator light ie green light It will remain lit until the recorder is removed from the computer..w-e-text .w-e-text , border: .5pt solid #000;};.w-e-text , border: 1px solid #000 !important;}1 x Temperature Recorder