Digital Temperature Controller -40°C to 110°C with LCD Display and Waterproof Sensor for Micro Thermostat Applications

29,95 €
+ 9,99 € Livraison

Digital Temperature Controller -40°C to 110°C with LCD Display and Waterproof Sensor for Micro Thermostat Applications

  • Marque: Unbranded

Digital Temperature Controller -40°C to 110°C with LCD Display and Waterproof Sensor for Micro Thermostat Applications

  • Marque: Unbranded
Prix de vente conseillé : 64,00 €
Prix : 29,95 €
Vous économisez : 34,05 € (53%)
Verkocht door:
29,95 €
+ 9,99 € Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

[Simple to Use]: The temperature range for this temperature controller is -40 to 110°C. Easy to set and adjust, featuring an HD LCD display and 4-button interface. This is a relay-based temperature controller; an external power supply must be connected for the load. [High Current 30A Relay]: High power capacity: 220V 30A. Suitable for high-power equipment such as refrigerators, brooders, incubators, fermenters, greenhouses, and more. Connect the power supply and heating or cooling devices, place the probe, set the desired temperature, and the unit will operate efficiently. [Heating/Cooling Function]: Heating Mode 'H': When the detected temperature is less than or equal to the set temperature minus hysteresis, the relay activates and the heating device turns on. When the detected temperature reaches or exceeds the set temperature, the relay disconnects and the heater stops. Cooling Mode 'C' operates on the same principle. [Delay Start & Temperature Correction Function]: Delay Start 'OPH': After completing a heating or cooling cycle, the system begins a timer 'T'. Once T is greater than or equal to OPH, the next cycle can begin. Temperature Correction 'OFE' (-10.0 to 10.0): Allows correction of temperature deviations that may occur during prolonged operation. Actual temperature = measured temperature + correction value. [High Temperature Alarm Function]: When the actual temperature reaches or exceeds the alarm threshold, the system triggers a visual and audible alarm and disconnects the relay. Press any button to silence the alarm. Use Steps: 1. Connect sensor to controller. 2. Connect power supply to controller. 3. Adjust start temperature, stop temperature, and temperature correction settings. 4. Disconnect power supply. 5. Connect load with power supply at the relay output terminal if required. 6. Reconnect power supply to controller. 7. Test and begin operation. Color: As shown Material: Plastic Package Contents: 1 x XY-DT01 Digital Temperature Controller Note: Other items not included. Light and screen display differences may cause slight color variations between image and actual item. Measurement error allowance: +/- 1-3 cm.
  • Identifiant Fruugo: 416615969-879073028

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité:
  • Do not let your children touch this product alone to avoid swallowing or other injuries
  • Adult supervision recommended.

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 9,99 € - Livraison entre mar. 07 octobre 2025–mer. 15 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Li Yinglan
  • Shanghai Yinglan Technology Co., Ltd.
  • No. 18, Lane 65, Huandong 1st Road, Fengjing Town
  • Shanghai
  • CN
  • 201501
  • zaiben14209zhichu@163.com
  • 13539268274

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149