CPU Cooler Cooling Fan Radiator Computer Supplies SNKP0064AP4 AMD EPYC 7000 Socket SP3

94,00 €
+ 10,49 € Livraison

CPU Cooler Cooling Fan Radiator Computer Supplies SNKP0064AP4 AMD EPYC 7000 Socket SP3

  • Marque: Unbranded
Verkocht door:

CPU Cooler Cooling Fan Radiator Computer Supplies SNKP0064AP4 AMD EPYC 7000 Socket SP3

  • Marque: Unbranded

94,00 €

Économisez 95,00 € (50%)

Prix de vente recommandé

189,00 €
En stock
+ 10,49 € Livraison
Verkocht door:

94,00 €

Économisez 95,00 € (50%)

Prix de vente recommandé

189,00 €
En stock
+ 10,49 € Livraison

Nous acceptons les modes de paiement suivants

Description

Features: 1.This CPU cooler is specially designed for Supermicro H11 generation 4U servers and workstations equipped with AMD EPYC 7000 series processors. 2.The radiator has been thoroughly tested and verified by for Supermicro to ensure quality and cooling performance. 3.This CPU cooler is durable, with large air volume, quiet and efficient heat dissipation. 4.The heat sink can effectively reduce the temperature generated by the CPU during operation. 5.The fan revolving speed is 3800rpm, low noise, stable and reliable performance. specification:Item Type: CPU Cooler Model: SNK-P0064AP4 Applicable Motherboard: For Supermicro H11 single/dual motherboard Socket Type: Socket SP3 Applicable CPU: AMD EPYC 7000 Series CPU Heat Sink Sound (dBA): 38dBA Speed (rpm): 3800rpm Size: Approx. 119 x 92.5 x 126mm / 4.7 x 3.6 x 5in Application Scope: 4U server/workstation platform Fan Connector: 4Pin Thermal Design Power (TDP): 180W Rated Voltage: 12V How To Use: 1. Before installing the radiator, please check that the radiator must be correctly aligned with the flowing direction of the system cooling air 2. According to the required air flowing direction of the radiator, adjust the position of the radiator mounting screw so that it can be aligned with the relevant nut bracket so that the radiator can be installed on the stiffening frame. 3. Remove the thermal interface material (TIM) or thermal grease protective cover. The required amount of TIM has been pre-applied on the bottom of the heat sink. Check the pre-coated TIM for damage. 4. Place the heat sink directly on the top of the CPU so that the four heat sink mounting screws are aligned with the four heat sink mounting studs or nut brackets on the slot reinforcement frame and fixed on them. The radiator must be correctly aligned with the flowing direction of the system cooling air. Please note that when tightening the four radiator mounting screws, do not install the radiator cooling fan on the radiator body. 5. Use a screwdriver with a Star T20 drill bit and adjust the torsion setting of the screwdriver to 16.1 kgf-cm (14.0 lbf-in). Before opening the screwdriver, make sure that the screwdriver bit is fully inserted into the hole of the heat sink mounting screw head. During the installation process, keep the heat sink mounting screws vertical. 6. Tighten the two diagonal radiator mounting screws, and rotate the screws 1 to 2 turns until they fit snugly. Do not tighten completely! Then, do the same with the remaining two diagonal heat sink mounting screws. 7. Make sure that the bottom of the radiator is correctly placed on the CPU and prevent the radiator from titrating. Please fully tighten all four heat sink mounting screws to complete the installation. 8. Install the radiator cooling fan and bracket assembly to the radiator body, and then tighten the single locking screw on the top of the fan bracket 9. Connect the SNK-P0064AP4 cooling fan connector to the fan header marked CPU on the motherboard. PackageList:1 xCPU Cooler 1 xCooling Fan 1 xUser Manual 1 x Screw
  • Identifiant Fruugo: 310606783-694480456
  • EAN: 7380486797346

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité: Do not let your children touch this product alone to avoid swallowing or other injuries.

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 10,49 € - Livraison entre jeu. 06 novembre 2025–jeu. 13 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • 91440300MA5HDL2A4K
  • SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
  • Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
  • Shenzhen
  • CN
  • 518102
  • 939301410@qq.com
  • 15625700418

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 950891051
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
  • Paris
  • FR
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611