Features: 1.EASY TO CONNECT: Submersible pump with 4 point screw connection, 20mm/0.79in national standard size, easy to connect. Anti slip and shock absorbing feet to avoid co vibration and reduce noise and secure installation. 2.PROFESSIONAL DESIGN: Fish tank water pump designed for fish tanks, aquariums and fountains, with IPX8 waterproof rating, 12V low voltage, brushless DC motor, excellent insulator. 3.PREMIUM MATERIAL: Aquarium water pump made of ABS flame retardant plastic, chemically resistant, heat resistant and highly resilient. Epoxy sealed motor, one piece sealed, waterproof, true water and electricity separation. 4.STABLE PERFORMANCE: Aquarium submersible pump with low power 20 W and high head 6m/19.7ft. Noiseless design and stable performance. Specially designed for fresh and salt water. 5.EASY INSTALLATION: The 3 strong suction cups on the bottom of the fish tank water pump help to hold it in place, so you can attach it vertically or horizontally to the right side of the aquarium. 6.WIDE USAGE: Aquarium pump for small to medium sized aquariums, fish tanks, backyard fountains, waterfalls, small water features, tabletop fountains, water gardens, small pond as well as rockeries, spouts, garden statues and irrigation systems. Specification: Item Type: Submersible Pump Material: ABS Parameters: Rated Voltage: DC12V, Rated Power: 20W Lift: Approx. 6m/16.7ft Flow Rate: 700L/H PackageList: 1 x Submersible Pump 2 x Water Outlet 3 x Suction Cup 1 x Gasket Note 1. The user must check whether the rated voltage on the pump label is the same as the actual voltage used before using the pump. 2. This pump can only be used inside fresh water, seawater can only be used for a short period of time. It cannot be used in strong corrosive liquids. 3. The pump must not be used in water above 45 degrees or below 0 degrees, otherwise it will cause damage to the pump. 4. The pump must not be allowed to idle when there is a lack of water, and work in water with more magazines, otherwise irreversible damage will be caused to the pump. 5. When installing or dismantling the pump, you must first unplug it and cut off the power supply. Make sure it is safe to operate again.