1. M.2 NVME to USB3.1 Type-A in-line hard drive enclosure2. JMS583 TYPEC 3.1 chip, support mainstream nvme pcie m2 hard drive on the market3. USB3.1 Type-A direct plug-in interface is downward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interfaces, of course, you can run 2.0 to 3.0 and then 3.0 to run 3.0)4. 1000MB/s (This data is for reference only) The actual reading speed is mainly related to the SSD and the device. The test results of the same device are different for different SSDs.5. Support M.2 NVME protocol solid state drive, only support PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD, do not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, do not support B+M key SATA protocol M.2 NGFF SSDSupport 2230, 2242 specifications, other lengths are not supportednetic suction protective cover, embedded powerful net, can better protect the interfaceProduct name:NVME to USB3.1 Hard Disk BoxTransmission speed:10Gbps (maximum)USB:USB3.1Product weight:about 48gColour:C:GrayMaterial:Aluminum alloySize:80x21x9mmPackage Contents:1 x SSD M2 NVME to USB Adapter1 x Heat Dissipation Silicone Patch1 x Screw Kit1 x ScrewdriverOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.