EMMC Module 16GB with Micro-SD Turn EMMC Adapter T2 for NanoPi/PC/RK3399 Development Board

27,42 €
+ 6,71 € Livraison

EMMC Module 16GB with Micro-SD Turn EMMC Adapter T2 for NanoPi/PC/RK3399 Development Board

  • Marque: Unbranded
Verkocht door:

EMMC Module 16GB with Micro-SD Turn EMMC Adapter T2 for NanoPi/PC/RK3399 Development Board

  • Marque: Unbranded
Prix : 27,42 €
Verkocht door:
27,42 €
+ 6,71 € Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

Programming system to eMMC module: Prepare an SDHC card with a capacity of 8G or above, unzip the EFlasher firmware and the flash tool win32diskimager separately, and run win32diskimagerI as an administrator under Windows. On the interface of win32diskimagerI, choose your SD card drive letter After decompressing the EFlasher firmware, click the Write button to burn to the SD card, or use the dd to write the EFlasher firmware to the SD card under Linux. After the programming is completed, eject the SD card from the computer, insert the development board and start the development board, then the system will start from the SD card and start automatically. EFlasher programming tool, you have multiple ways to operate EFlasher. 1: Connect or LCD display and USB mouse, operate EFlasher on the graphical interface. 2: Connect the development board to the LAN through a network cable, log in to the development board through ssh, and then enter the eflasher to operate according to the prompts of the line. (Note: The user logged in by ssh is root, the password is , and the development board IP can be viewed (Obtained in the background of the router). 3: Log in to the serial terminal through the debugging serial port, enter the eflasher on the terminal to operate. 4: Connect an Icd2usb accessory to the development board, press the accessory. The K1 key above can select the system to be programmed, then press the K2 key to confirm the programming, the programming progress will be displayed on lcd2usb. After the programming is completed, cut off the power, then pull out the SD card on the development board, and then power on again, the development board will start the system you just programmed from eMMC. Colour: blue Material: plastic Size: 18.5x16mm Package Contents: 1 * 16GB EMMC Module 1 * Micro-SD turn eMMC adapter Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 360271032-783374682
  • EAN: 4841085511243

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Check the product before use, do not approach the fire source, to ensure safe use.
Ingrédients: 9% metal 91% plastic

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 6,71 € - Livraison entre ven. 10 octobre 2025–mar. 28 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhenshidongbangguojimaoyiyouxiangongsi
  • Shenzhenshidongbangguojimaoyiyouxiangongsi
  • longgangqu bantianjiedao banxuegangdadao 3012hao8707-1shi
  • Shenzhen
  • CN
  • 518000
  • kuajingpenyuyan@163.com
  • (+86)075584621615
  • https://www.dbgj.com

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Johnny Lin
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch.,MADRID,MADRID,ES
  • Madrid
  • Spain
  • 28013
  • ecrepservice@hotmail.com
  • 34 910563102
  • https://www.OASIS-SERVICE.com