2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

10,95 €
la livraison GRATUITE

2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

  • Marque: Unbranded

2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

  • Marque: Unbranded
Prix de vente conseillé : 13,95 €
Prix : 10,95 €
Vous économisez : 3,00 € (21%)
Verkocht door:
10,95 €
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

Features:The module uses high-quality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA.The module working voltage is available in 5V, 9, 12V, 24V.The module can be triggered by a jumper to set a high level or a low level.Fault-tolerant design, even if the control line is broken, the relay will not move.Power indicator (green), relay status indicator (red).The interface design is user-friendly, all interfaces can be directly connected through the terminal block, very convenient.Specification:Module Size:50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73inHole Diameter: 3.1mm/0.12inHole Interval Distance:44.5 x 35.5mm / 1.75 x 1.4inWiring Diagram:DC+: Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).DC-: connected to the negative pole of the power supply.IN1:1 signal signal trigger terminal, you can set the high or low level control relay to pull in.IN2: 2 channel signal trigger terminal, you can set the high or low level control relay to pull in.Relay output:NO1: 1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.COM1:1 channel relay common interface. NC1: 1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.NO2: 2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.COM2: 2 channel relay common interface.NC2: 2-channel relay normally closed interface, short-circuit with COM2 before the relay is closed, and float after the suction.High and low trigger selection: 1. S1 is a high-low trigger selection for 1 relay;2. S2 is the high and low level trigger selection of 2 relays.3 com is shorted with low, the corresponding relay is triggered by low level, and when com is shorted with high terminal, it is triggered by high level.Package List:1 x Module
  • Identifiant Fruugo: 417914838-881261943
  • EAN: 7792047615042

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 09 octobre 2025–jeu. 16 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795