Electret Microphone Amplifier Module MAX4466 Adjustable Gain GY-4466 CMA-4544PF W

5,26 €
la livraison GRATUITE

Electret Microphone Amplifier Module MAX4466 Adjustable Gain GY-4466 CMA-4544PF W

  • Marque: Unbranded

Electret Microphone Amplifier Module MAX4466 Adjustable Gain GY-4466 CMA-4544PF W

  • Marque: Unbranded
Prix de vente conseillé : 10,50 €
Prix : 5,26 €
Vous économisez : 5,24 € (49%)
Verkocht door:
5,26 €
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

Item Type: Microphone Amplifier Module Description: 1. This carefully designed electret microphone amplifier can add a lot to your project 2. Fully assembled and tested circuit board with soldered 20-20KHz electret microphone 3. Has excellent power supply noise suppression 4. Most suitable for projects using FFT, such as voice converters, audio recording / sampling and audio response projects 5. On the back, we include a small trimmer potentiometer to adjust the gain. You can set the gain from 25 times to 125 times 6. Drop to about 200mVpp (normally, about 6 inches away), ideal for connecting to something that requires "line level" input without clipping, or up to about 1Vpp 7. Very suitable for reading from microcontroller ADC. The output is rail-to-rail, so if the sound gets louder, the output can reach 5Vpp! Use: Connect GND to ground and connect VCC to 2.4-5VDC. For best performance, use the quietest power supply available. The audio waveform will be output from the OUT pin. The output will have a DC bias of VCC / 2, so when it is completely quiet, the voltage will be a stable VCC / 2 volts (DC coupled). If the audio device you use requires AC-coupled audio, place a 100uF capacitor between the output pin and the input of the device. If you are connecting to an audio amplifier with a differential input or including decoupling capacitors, you do not need a 100uF capacitor. The output pins are not designed to drive speakers or the smallest in-ear headphones, but to connect them directly to the speakers, so you need an audio amplifier (for example, a 3.7W stereo amplifier). If connected to a microcontroller pin, no amplifier or decoupling capacitor is needed-connect the OUT pin directly to the microcontroller ADC pin
  • Identifiant Fruugo: 385872593-829332080
  • EAN: 686237251660

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité:
  • Not suitable for children under 36 months
  • Choking Hazard
  • Adult supervision recommended

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre ven. 03 octobre 2025–lun. 13 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • No.9-20, Building B, City of Light
  • Huaiyin District, Jinan
  • China
  • Jinan
  • CN
  • 250000
  • jntongxuan04@163.com
  • 13380966881

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • WongBo
  • NG HOT SARL
  • 99 bis avenue du Général Leclerc
  • 99 bis avenue du Général Leclerc
  • France
  • Paris
  • FR
  • 75014
  • ngnghot@outlook.com
  • 33695000695
  • https://www.captaincontrat.com/creer-son-entreprise/sarl/capital-social-de-sarl-montant-minimum-constitution-modification...tout-savoir