Frequency to Voltage Converter Module 0~200Hz to Analog Voltage Module 5mA(FVS-200Hz10V)

22,79 €
la livraison GRATUITE

Frequency to Voltage Converter Module 0~200Hz to Analog Voltage Module 5mA(FVS-200Hz10V)

  • Marque: Unbranded
Verkocht door:

Frequency to Voltage Converter Module 0~200Hz to Analog Voltage Module 5mA(FVS-200Hz10V)

  • Marque: Unbranded
Prix de vente conseillé : 34,79 €
Prix : 22,79 €
Vous économisez : 12,00 € (34%)
Verkocht door:
22,79 €
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

Features 1、Features: Convert the 0-200 Hz frequency pulse signal into an analog voltage signal of 0-10V/0-5V. Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion. 2、Convert the 0-200 Hz frequency pulse signal into an analog voltage signal of 0-10V/0-5V. 3、Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion. 4、The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input signal frequency should be maintained for more than 0.5 seconds.The output current is 5mA. 5、The on-board multiturn potentiometer is used for calibration correspondence between frequency and voltage. Specification Features: Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion. The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input signal frequency should be maintained for more than 0.5 seconds.The output current is 5mA. The optical isolate is used to ensure the anti-interference ability of the signal input. Specification: Size:7.3 x 5 x 2.8cm / 2.87 x 1.97 x 1.1in Frequency FVS-200Hz5V Package List: 1 x Converter Module Note: For use with PLC, support for NPN type. Must have a ground wire. If you need to use an encoder, you need to keep the encoder running at a constant speed for more than 0.5 seconds. If the signal input is turbine flow, etc., due to signal matching, an 817 diaphragm and a resistor must be added to match the flowmeter to function properly. If there is a deviation in the correspondence when using, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/V potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself. Package List
  • Identifiant Fruugo: 271639068-602151541
  • EAN: 9308869098475

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre lun. 27 octobre 2025–ven. 31 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour