Automatic Intelligent Household Double Layer Bean Sprouts Machine Maker Grain ToolEU Plug 220V Condition: Item Type: Bean Sprouts Machine Body Material: ABS Plastic Color: Green Power: 20W Pumping Power: 8W Sprouting Time: 2.5-4 Days Layer: Double Layer Product Size: Approx. 26 x 34 cm / 10.2 x 13.4 in Cable Length: Approx. 80cm / 31.5in Weight: Approx. 1781g / 62.8oz Usage: 1. Add water to the pan bottom until high water level. 2. Connect long water pipe and water pump outlet completely, to confirm that the cover can cover properly. 3. Put the tray into the nurture container. 4. Put seed down to the tray. Pick those bad beans out (Grains or beans should be soaked in water for 1-2 hours before they are put into the machine). 5. Put the spray head on the long water pipe. 6. Close the nurture cover and fabric cover on the unit to prevent exposure to light nuts. 7. Click the power button and choose one season button. (Note: When the temperature is below 15℃, recommended winter file. When the temperature is between 13-25℃, recommended spring/autumn file. When the temperature is above 25℃, recommended summer file.) 8. Leave for 3-4 days or as needed. Air temperature will be adjusted as we choose. Operation: 1. Connect the power, press the power key and the power indicator will light all the time. 2. Then press one of the season keys, the machine starts to work and the season key indicator keep flashing. 3. When replace the water, directly disconnect the power, do not need to press any key, after replacing water, directly connect the power, do not need to press any key. The machine has a power-off memory function. 4. When complete, the machine will stop working, the season indicator light goes off and the power key indicator flashes.