STM32H743 MCU running at 480 MHz High-Precision / low-noise -42688-P IMU CAN Bus Support Dual Camera Inputs switch 3 On-board BEC output 5V, 6V/8V and 9V/12V 9V/12V ON/OFF Pit Switch On-board voltage & current sensor Integrated BMP280 barometer Plug-and-play GPS, CAN, ports Small & low- fits into compact frames Supports INAV (6. 1.1 & later), (4. 4 & later) MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash IMU: -42688P (SPI3) Baro: BMP280 (I2C4) OSD: AT7456E (SPI2) : MicroSD card slot on SDMMC2 7x Uarts (1,2,3,5,6,7,8) with built-in inversion. 14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2 and RSSI) 3x (I2C1 and I2C2 for external devices, I2C4 for onboard sensors) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Green) USB/DFU Key Extender with USB Type-C Dual Camera Inputs switch 5V/9V(12V) for Camera/VTX power switch High-precision Current Sense (90A continuous, 220A ) Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ) Static power 160mA@5V (The actual object has words, to avoid risks, the picture has been processed) Specification:A Color: As Shown Material: PCB Package Contents: 1 * Flight Controller Kti Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.