1. The Wiring Is Neat And Knot-Free, Precise Wire Diameter Control, Epc Automatic Wiring, Feeding And Printing Are Smoother. The Wire Diameters Are Consistent And Arranged In An Orderly Manner. The Wire Diameter Tolerance Is ±0.03mm. 2. Smooth Printing Without Fear Of Clogging. High-Purity Impurity-Free Raw Materials Are Used. The Good Fluidity Enables The Filament To Be Extruded Evenly And Smoothly During Printing. Does Not Clog The Nozzles And Improves Printing Success Rate. 3. Wide Adaptability, Has Been Verified To Be Perfectly Compatible With Tuozhu Neptune Printers, Ender Series, Cr Series, And Complete Machine Series. It Is Also Compatible With Mainstream Fdm Printers On The Market. 4. Stable Wire Diameter Output, Creating Stable Printing 5. The Material Has High Purity And No Waste Is Added, Which Improves The Stability Of The Material And The Smoothness Of Discharging.<br><br>Printing Temperature: 195~210°C Base Plate Temperature: 0~60°C Base Plate: Pei Base Plate Printing Speed: 40-50mm/S Idling Speed: 50-70mm/S Density: 1.25±0.05g/cm³ Melt Flow Rate: 5-7g/10min (190℃ 2.16kg) Water Absorption: 0.5% Tensile Strength:Greater than 60Mpa Bending Modulus:Greater than 60Mpa Elongation At Break:Greater than 3.0% Diameter: 1.75mm (±0.02mm) Bubbles: 100% Bubble-Free Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Colour:Yellow Material:PLA<br><br>Package Contents: 1 Roll Of 3D Printing Spool<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.