Original LCD Screen and Digitizer Full Assembly for Fitbit Versa 2 Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, be sure to ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal components. Wear eye protection and handle glass carefully to avoid injury. Tip 2: Simulate testing Screen replacement is a fragile component. We strongly recommend testing before full installation. This means partially disassembling the watch, connecting the motherboard to the new LCD/screen assembly via the audio cable, powering on the device, and verifying proper function. If the test is successful, proceed with full installation. If the screen does not display, immediately. Do not force installation if issues occur. No responsibility will be accepted after the screen has been installed. Tip 3: Avoid cable over-bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen. Product Information 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Versa 2 2. Replace your damaged or non-functional screen with a new unit 3. Restore your device’s appearance and performance 4. Designed for precise fit and full functionality 5. Each unit is tested and verified before shipment 6. Professional installation is highly recommended. No responsibility is assumed after installation