Hand‑ Coil On Plug fast ignition tester, battery powered, with stable and professional performance. Designed to and quickly determine whether the produces the proper spark for the plug. It works by receiving the signal from the secondary ignition coil, and the test is accurate and . the signal is received, the tester will determine whether the produces the amount of voltage and arc duration. If the voltage is , the tester will beep and the red LED indicator will flash; if the arc duration is , the green LED will also flash. Specification: Item Type: Ignition Coil Tester How to Use? 1. Correctly connect the connector and sensor head to the tester. 2. The induction head is aligned with the ignition coil to start working, and the working status of the ignition coil is judged according to the of lighting. Test Results: Red LED Light: , steady flashing and beeping indicates the is producing the amount of voltage. No response or an inconsistent response indicates the is NOT producing the amount of voltage. This may be caused by one of the following: 1. Fouled , or incorrect space 2. Damaged/corroded wires or 3. Faulty coil or PCM Green LED light: and steady flashing indicates the duration of the arc is . No response or an inconsistent response indicates the duration of the arc is NOT . This may be caused by one of the following: 1. Shorted windings inside the coil 2. Resistance or connections in the 3. primary / secondary connections 4. Faulty coil Material: ABS colour: As shown Package Contents: 1 x Ignition Coil Tester(without battery) 1 x Adapter Lever 1 x Sensor 1 x Storage Bag Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.