This product uses an infrared remote control to adjust brightness and dynamic change modes, with delay shutdown settings and memory function for convenient use without frequent reconfiguration. Compatible with all single-color LED strip lights. Product Name: IR Remote Controller Dimmer LED Type: High Power LED Input/Output Voltage: DC 12-24V Working Temperature: -20°C to +60°C Power Rating: 360W Output Current: 30-36A Remote Control Battery: 2 x AAA (not included) Control Distance: Up to 10 meters Instructions: 1. Connect the LED strip plug to the controller output socket, ensuring correct polarity alignment. Check for any short circuits before powering on. If a short circuit is detected, resolve it immediately to prevent damage to the controller or LED strip. 2. Plug in the power supply and operate the remote control according to your lighting requirements. 3. When installing the infrared remote control model, position the receiver where it is not obstructed to ensure reliable signal reception and avoid malfunction. 4. Infrared models require line-of-sight operation; they do not function through obstacles. Function Modes: - ON/OFF: Turn the light on or off - SPEED+/SPEED-: Adjust the speed of dynamic effects - LIGHT: Set to maximum brightness - UP/DOWN: Adjust brightness level - MODE+/MODE-: Select from 8 dynamic lighting modes (Gradient, Breath, Flash, Slow Flash, Quick Flash, Skip, Blink, Candle Light) - 10%-100%: Choose desired brightness percentage - TIME 5-60: Set delay shutdown time in minutes Color: White + Silver Material: Plastic + Metal Package Contents: 1 x Controller 1 x Remote Control Note: The package includes only the items listed above. Other accessories are not included. Slight color variations may occur due to differences in lighting and display settings. Measurement tolerance: ±1-3 cm.