3 Axle USB Control Card Aluminum Alloy Shell with Emergency Stopping Function Handwheel

286,42 €
+ 3,24 € Livraison

3 Axle USB Control Card Aluminum Alloy Shell with Emergency Stopping Function Handwheel

  • Marque: Unbranded
Verkocht door:

3 Axle USB Control Card Aluminum Alloy Shell with Emergency Stopping Function Handwheel

  • Marque: Unbranded

286,42 €

Économisez 343,70 € (54%)

Prix de vente recommandé

630,12 €
En stock
+ 3,24 € Livraison
Verkocht door:

286,42 €

Économisez 343,70 € (54%)

Prix de vente recommandé

630,12 €
En stock
+ 3,24 € Livraison

Nous acceptons les modes de paiement suivants

Description

1、USB does not require drivers, all are plug and play, and hot plugging is supported. 2、USB bus uses high‑end chip magnetic coupling isolation, truly valuable isolation, different from the optocoupler isolation of the general control card. 3、Input and output, to achieve ultra‑reliability, absolutely guarantee the safety of computer USB. At the same time, it guarantees superior electro magnetic compatibilityimmunity. 4、Single‑chip, the system is more streamlined, and the stability of the multi‑chip processing is much higher than the average. 5、Dual‑core ultra‑high‑speed CPU (single core with a maximum frequency of 204MHz), the processing power is extremely redundant. And to ensure the 3K axle linkage 1000KHz pulse output frequency, 4 axle linkage 750KHz pulse output frequency, 6‑axle linkage p Features: Support all versions of Mach3, including the latest version. Fit for all Windows versions. USB bus uses high-end chip magnetic coupling isolation, truly valuable isolation, different from the optocoupler isolation of the general control card. Input and output, to achieve ultra-reliability, absolutely guarantee the safety of computer USB. At the same time, it guarantees superior electro magnetic compatibilityimmunity. Single-chip, the system is more streamlined, and the stability of the multi-chip processing is much higher than the average. Dual-core ultra-high-speed CPU (single core with a maximum frequency of 204MHz), the processing power is extremely redundant. And to ensure the 3K axle linkage 1000KHz pulse output frequency, 4 axle linkage 750KHz pulse output frequency, 6-axle linkage pulse output frequency up to 500KHz, can be connected to servo / step. The size of the motion control buffer can be set to ensure stable operation during the fastest interpolation cycle, and it can run smoothly when the computer is overloaded. With 16 isolated input port, the input interface is simpler, the port are wet and dry contacts, and the wiring is simpler. The dry contact method only needs to connect a physical switch to the ground line externally. All 16 input port have signal indication. When the indicator is low, the indicator is on and the debugging is simple and clear. Has a maximum of 24 output port (8 channels, RS485 can be expanded), 32 input port(with 16 input, RS485 can expand 16). PWM speed control output port (isolated), PWM frequency can be set, duty cycle 0~1000 is continuously adjustable. With the speed measurement function, the actual spindle speed is displayed in real time on the Mach3 interface, and the measurement is accurate and stable. The board is crafted by engineers and the design level is clear at a glance. With 256 bytes of NVRAM space, you can save the coordinate values and processing line numbers of 6 axes. No need to change the next time you power on. All motion axle outputs are differential signals that can be connected to servo high speed signal input. Can be set from the axle, support double X, double Y, double Z. Soft limit bottom layer processing, system is safer. RS485 isolated bus, can expand the input and output or connect to the servo read position, connect the grating scale, etc. (requires custom development). Fully isolated, all inputs and outputs are isolated from the motion control core, and pulse isolation is isolated using high speed 10M optocouplers. Support single and double pulse mode. Easy to upgrade, this product upgrade hardware layer firmware is only connected to the brush through USB, fast, not afraid of brushing, firmware is open, you can try for 1 hour, more than 1 hour will stop. Drive output type, strong anti-interference ability, long-distance transmission. Specification: Handwheel Pulse Output:100PPR Package List: 1 x Control Board 1 x USB Cord 1 x Fixing Bracket 1 x Handwheel 1 x Hook
  • Identifiant Fruugo: 389210744-834404169
  • EAN: 627036780029

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité:
  • Not suitable for children under 36 months
  • Choking Hazard
  • Adult supervision recommended

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 3,24 € - Livraison entre ven. 31 octobre 2025–lun. 10 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • No.9-20, Building B, City of Light
  • Huaiyin District, Jinan
  • China
  • Jinan
  • CN
  • 250000
  • jntongxuan09@163.com
  • 13380966881

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • WongBo
  • NG HOT SARL
  • 99 bis avenue du Général Leclerc
  • 99 bis avenue du Général Leclerc
  • France
  • Paris
  • FR
  • 75014
  • ngnghot@outlook.com
  • 33695000695
  • https://www.captaincontrat.com/creer-son-entreprise/sarl/capital-social-de-sarl-montant-minimum-constitution-modification...tout-savoir