Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

42,95 €
+ 9,99 € Livraison

Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

  • Marque: Unbranded
Verkocht door:

Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

  • Marque: Unbranded

42,95 €

Économisez 41,05 € (48%)

Prix de vente recommandé

84,00 €
En stock
+ 9,99 € Livraison
Verkocht door:

42,95 €

Économisez 41,05 € (48%)

Prix de vente recommandé

84,00 €
En stock
+ 9,99 € Livraison

Nous acceptons les modes de paiement suivants

Description

Description for Mini One Cooper S Convertible R52 (2001-2006) rear hood soft top weather rubber seal repair self adhesive. This product is a DIY rubber repair solution for replacing the worn or cracked rear weather seal on the soft top of the Mini Convertible. It replaces the rubber strip located above the chrome trim that runs along the rear edge above the boot and quarter panels, an area commonly affected by aging and sun exposure. The repair seal is self-adhesive with 3M tape and measures approximately 2 meters in total length. Minor trimming may be required to fit the length and accommodate the third brake light. Instructions: Step 1: Clean the surface thoroughly to ensure maximum adhesion. Step 2: Apply the new rubber strip over the prepared flat edge where the old rubber was removed, slightly overlapping onto the roof material. Use additional adhesive to reinforce bonding. Note: Adhesive sets quickly, so ensure correct placement before application. The new rubber provides a slightly increased profile where it overlaps the chrome, improving both appearance and sealing performance. It helps protect the roof from UV damage and restores weatherproofing. This repair has been tested on an R52 model and proven durable through multiple seasons in various weather conditions. Avoid high-pressure washing of the roof area. Clean with a sponge and rinse with water. For added security, apply a small amount of super glue (not included) in concealed areas to prevent lifting, or use a bead of silicone if needed. For easier installation, the strip can be removed temporarily to allow trimming away from the vehicle, minimizing risk to the roof fabric. Tamper-proof Torx screws under the chrome strip can be accessed by releasing the side latches (boot loading mode), allowing the lower roof section to be tilted up. Support the roof with a suitable prop during work. Package Includes: 1x replacement self-adhesive rubber seal
  • Identifiant Fruugo: 425741200-894207258

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité:
  • Keep out of reach of children: Prevent accidental ingestion
  • misuse
  • or harm.

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 9,99 € - Livraison entre mer. 29 octobre 2025–mar. 04 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Jiang Jiamin
  • Shanghai Zhenyou Technology Co., Ltd.
  • Building 1, No. 5601, Yanqian Road Fengxian District
  • Shanghai
  • CN
  • 201400
  • chengchan41525@163.com
  • 13822016759

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149