Power supply mode: DC Continuous output current: 2A Input voltage: 48V Suitable motor: DC Maximum applicable motor capacity: 60W Maximum output current: 3A Interface: 1. VCC: Connect to the positive pole of DC 5V power supply 2. GND: Connect the negative terminal of the DC 5V power supply, which needs to be grounded together with the signal terminal 3. IN1-IN8: Connect to the IO port of a microcontroller or PLC 4. H/L jumper: H is high level, L is low level, and the middle is the common terminal 5. VIN: Load side power supply DC positive level, GND: Load side power supply DC negative pole 6. Connect the load terminals OUT1-OUT8 to the positive pole of the load device 7. Connect the load terminal GND to the negative terminal of the load device Features: 1. Indicator light: The 5V version includes an indicator light that illuminates when a signal is present 2. Application: The output can control high-power DC devices such as motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. PWM input allows control of motor speed, light brightness, etc. 3. Control terminal voltage range: DC 5V to DC 48V. Since the control board does not have high-power heat dissipation design, it is recommended that single load power does not exceed 60W 4. The control and signal sides are isolated using optocouplers for safe operation Specifications: - Model: 5V version - Color: As shown - Material: Plastic Package Contents: 1 x 8 Channel MOS Module