Code cloner for an extra spare remote control: RF code cloner in remote control design to clone over your old remote control codes. Perfect for transferring/copying the code for garage doors, automatic gates, security systems and household appliances. Always a backup copy at hand: Copy the functions from your original remote control with this 4-channel RF duplicator with learning functions, so you always have a backup or extra garage door opener at hand. Perfect for the garage door: Compatible with the fixed frequency of 433 MHz, which is the frequency used by the vast majority of garage door openers. Compatible with the following chipsets: 2260 (all manufacturers) 2262 (all manufacturers) PT2264, 5326 (all manufacturers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers)1527 (all manufacturers) 2240 (all manufacturers) HCS101, HCS200 \ HCS201 (parts of the code) HCS300 \ HCS301 (parts of the code) Parts of single chip. NOTE: This model is not suitable for rolling code. In that case, you should have a different model. Cannot copy the car alarm box (for security reasons). Specification: Signal transmission speed: 50-60 KHz Voltage: 12 V Current: 10 mA Frequency: 433 MHz Signal transmission power: 10-12 mW Signal transmission distance: Up to 50 m in free space Color: Black/silver Battery: 2V27A battery (included) Size: 6x4x1.2 cm Weight: 28 g Package includes: Universal code cloner - remote control How to copy: Step 1: Remove the old code from the duplicator 1. Continuously press buttons A and B until the LED flashes 2. Release button B (keep pressing button A) and slowly press button B 3 times, LED flashes 3. Release button A, code removal is complete Step 2: Copy code from the original transmitter 1. Place the duplicator as close to the original transmitter as possible. 2. Press and hold button A on the original transmitter, press and hold button A on the duplicator, until you see the duplicator's LED flashing. 3. Release both buttons, end code copying. Copy the next button in the same way. Reset function: Press and hold buttons C and D for 3 seconds, LED flashes, all buttons return to the last copied codes. RF code cloner in compact remote control design Copies the code for garage doors, gates, etc. Compatible with fixed frequency of 433 MHz Signal transmission of up to 50 m