Fitment: Fits most Awning of RVs and Campers, include and A&E 8500 and 9000 Awnings. Material: Made of steel-aluminum that maintain strength without rusting. The thick steel mandrel can fit through of the materials you are connecting. Handle Gloves: The polyethylene material on the handle can keep the handle smooth and no slipping. And the shape design conforms to the fingers. Easy to Install: Align previously drilled or drilled holes, apply pressure to the mandrel and secure the rivets in place, then thread the rivets through them. Size: Handle Lift: Base is 3-1 / 2 inch x 1inch . Two 1/4 inch dia. The size between the rivet mounting holes is 2-3 / 4 inch center to center. Handle is 5 inch long. Installation: Handle Lift: Step 1: Remove the old rivet from the old lift handle with a drill. : Place lift handle in punched slot of main arm and align rivet holes. Step 3: Insert rivet through hole in main arm, place hex nut over rivet shaft and tight against rivet. Step 4: Secure the lift handle by pulling rivet tight with rivet . Rafter Rivet: Step1:Choosing the Right Rivets Rivets come in a variety of materials, first considering aesthetics and whether it is prone to shifting after installation. Rivets come in a variety of materials. The first thing to consider is aesthetics and whether it is easy to shift after installation. Our products are made of steel core and easily pass through two different materials. : Remove the rivets with a cleaning cloth or sandpaper to prevent slippage in the . Step 3: Always check your positioning carefully, then align the holes that are punched or drilled pass the rivets through them Colour:As Shown Material:ABS+Metal Package Contents: 1 x Rafter rivet 1 x HandleLift Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.