2 Pcs A4950 AT8236 Dual Motor Drive Module DC Brush Motor Forward and Reverse Drive Board Module Su

25,95 €
+ 4,49 € Livraison

2 Pcs A4950 AT8236 Dual Motor Drive Module DC Brush Motor Forward and Reverse Drive Board Module Su

  • Marque: Unbranded
Verkocht door:

2 Pcs A4950 AT8236 Dual Motor Drive Module DC Brush Motor Forward and Reverse Drive Board Module Su

  • Marque: Unbranded

25,95 €

En stock
+ 4,49 € Livraison
Verkocht door:

25,95 €

En stock
+ 4,49 € Livraison

Nous acceptons les modes de paiement suivants

Description

: Module interface 1. VM: The power supply of module is input according to the parameters of the motor, and the measured range is 7.6~40V 2. VCC: connect to 5V input, do not input 3.3V, otherwise it will affect the performance 3. GND: is the ground pin Color: green Material: PCB+Metal Control example (when the above 3 pins are connected) Task 1: A motor rotates forward with a duty cycle of 50% Solution: 2 lines of motor A are connected to AOUT1, AOUT2, AIN1 respectively, connected to low level, AIN2 is connected to 50% PWMO Task 2: B motor reverse, duty cycle 20% Solution: The two wires of motor B are connected to BOUT1 and BOUT2 respectively. BIN1 is connected to high level, BIN2 is connected to 20% PWM (If your PWM frequency is relatively high, such as 10KHz, you need 2 PWM pins to control the forward and reverse rotation. If you use 's default PWM frequency of 500HZ. You can use a 10 and a PWM pin to control the forward and reverse rotation, But the effect is not as good as 2 PWM pins) Specification: Function: It can control the forward and reverse rotation of 2 motors (for example, only one of this module is needed for a balance car) Voltage: 7.6~40V Current: The module has current limiting protection, 2A (overcurrent will not power off, only limit the maximum output current Control: 4 PWM pins are required, (if inversion is not required, only 2 PWM pins are required) It is much simpler to use than 298 Product size: 23 x 18.3mm Lead out: 2 rows of 7pin pin headers Spacing: 20mm Package Contents: 2 x motor driver module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 425826280-894383837
  • EAN: 8522367039018

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: When using the product, monitor children in real time to ensure safety during use.

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 4,49 € - Livraison entre ven. 31 octobre 2025–ven. 07 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • XDH Tech
  • willight Technology UG (haftungsbeschränkt)
  • 2 Rue Coysevox Bureau 3, Lyon, France
  • Lyon
  • FR
  • 69001
  • xdh.tech@outlook.com
  • +33 652768898
  • http://jueruiindustry.cn/

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • XDH Tech
  • willight Technology UG (haftungsbeschränkt)
  • 2 Rue Coysevox Bureau 3, Lyon, France
  • Lyon
  • FR
  • 69001
  • xdh.tech@outlook.com
  • +33 652768898
  • http://jueruiindustry.cn/