Working voltage: 90250V<br> Working frequency: 50-60Hz<br> Working temperature: -2060<br> Total load power: 2000w<br> Specifications:<br> 1. Turn ordinary non-smart appliances or equipment into smart;<br> 2. Remote control.<br> 3. Group control. The lights can be grouped to achieve unified control (simultaneous switching, timing, etc.)<br> Instructions<br> Self-locking mode pair code description<br> (The same button, press one-time to turn on, then press--down to turn off. This mode is suitable for 1 remote control to control 1 receiver)<br> Setting method: Press the pairing button on the receiver twice, the LED flashes once and then lights up; press the button on the remote control that needs to be paired, when the LED<br> The indicator light will flash 3 times and then turn off, the self-locking mode is successfully set.<br> Interlock Mode Pairing Instructions<br> (settings - one button can only be turned on, another - - a button can only be turned off. Requires a remote control with at least two buttons. This mode is suitable for - -<br> The remote controls multiple receivers. )<br> Setting method: Press the code pairing button on the receiver 3 times, then the LED flashes once and then lights up; press the button that needs to be set as the open function on the remote control<br> If button A) after the receiver indicator flashes, continue to press the button on the remote control that needs to be set to be off (eg button B) the receiver indicator<br> Blinking, the interlock mode is set successfully.<br> Jog mode code matching instructions<br> (Same key, hold to open, release to close.)<br> Setting method: Press the pairing button on the receiver once, the LED flashes once and then lights up; press the button on the remote control that needs to be paired, when the LED flashes once<br> The indicator light will flash 3 times and then turn off, the self-locking mode is successfully set.<br> reset settings<br> After pressing the receiver's learn button 8 times, the receiver clears all remote control data in its memory. When the receiver's LED blinks 8 times in a row<br> after the reset is completed. If it has been set to the power-on state, it will also be reset to the power-on and power-off state.<br> Power-on setting method (applicable to control lights with manual switch): Factory "default power-on and power-off. Press 6 times to learn on the receiver<br> Press the button, the indicator light flashes 3 times. The power-on and power-on settings are successful.<br> Package Included:<br> Smart Switch Module*1<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store