Item Type: 3D Printer Drip Stand_x000D_ Material: Aluminum alloy_x000D_ Confirmed Applicable Models: For Phrozen Sonic Mini, Most other 5.5in/6in LCD 3D Printers where the resin vat is secured with thumbscrews_x000D_ Confirm Inapplicable Models: All models of for Anycubic (the printing platform is different)_x000D_ The Method to Test Whether Other Machine Models are Suitable: Ask the customer to print the model linked to the print model below, and try to install it on your own machine to see if it is suitable._x000D_ Length: Approx. 50mm / 2in_x000D_ Width: Approx. 20mm / 0.8in_x000D_ Height: Approx. 55mm / 2.2in_x000D_ How to Use: _x000D_ 1. Remove the screws that fix the resin bucket on the side where you want to install the drip stand_x000D_ 2. Fix the drip holder as a whole to the thread, and then tighten the thumb screw again_x000D_ 3. During the printing process, the drip tray cannot touch your bottom plate_x000D_ 4. After printing, move up the build platform_x000D_ 5. Remove the platform and hang it on the bracket_x000D_ 6. The uncured resin will drip back into your trough_x000D_ 7. You can close the lid as needed