Say goodbye to foggy sporting gear. The Jaws Spit Antifog Lens Gel works to prevent fogging in dive masks, paintball masks, binoculars and so much more. The Jaws Spit Antifog Lens Gel comes with a handy SpitClip for convenient transport! Non-toxic formula Long lasting gel formula Wet or dry applications NOTE: Do not use this product on goggles Instructions WATER SPORTS APPLICATION (WET): When you are applying to a glass lens be sure the lens has been pre-cleaned with JAWS scrub mask cleaner product prior to applying the anti-fog. New glass lens masks must be cleaned with scrub in order for the anti-fog to work properly. When you are applying on a plastic, polycarbonate or acrylic style lens be sure to rinse, dunk or wash it first ensuring there is no foreign buildup or objects on the lens. Apply a VERY SMALL amount of anti-fog on the inside of the lens. Rub the anti-fog over the entire area with your finger - then, it is important to rinse the product off the lens leaving no residue. Visually check each lens prior to use LAND SPORTS -OR- INDUSTRIAL APPLICATION (DRY): When you are applying on a glass, plastic, polycarbonate or acrylic style surface be sure the surface is clean. Both Quick spit and SEESafe can be used to pre-clean the surface prior to applying the product as an anti-fog (2-in-1 Formula). Simply apply Quick spit or SEESafe to the inside and outside of the lens, add water and wash with fingers or a clean damp cloth. Be sure to dry the surface after cleaning prior to applying the product as an anti-fog. Spray a small amount on the dry surface being treated. A larger surface will require more product but over applying is counterproductive. Rub or spread the anti-fog over the entire area. Then, gently buff with a JAWScloth or a clean, lint free, soft cloth only until product haze disappears.